مساعدة software

[mohamed khabiri]

P50-352TV3.4
HD

[mohamed khabiri]

P50-352TV3.4
HD

EMMC/MMC/SD controller initialization.
current clock: 400000Hz, host selected_mode: 0x0
current clock: 120000000Hz, host selected_mode: 0xb
tuning done! valid phase shift [4, 0] Final Phase:18
current clock: 26000000Hz, host selected_mode: 0x2
current clock: 120000000Hz, host selected_mode: 0xc
MMC/SD Card:
MID: 0xea
Read Block: 512 Bytes
Write Block: 512 Bytes
Chip Size: 7376M Bytes (High Capacity)
Name: "S0311"
Chip Type: MMC
Version: 5.1
Speed: 120000000Hz
Bus Width: 8bit
Mode: HS400
env_mmc_set_offset m_offset 0x100000, b_offset 0x0
Loading Environment from MMC... OK
Net:
scanning usb for storage devices... 1 Storage Device(s) found


Slave boot startup


version:U-Boot 2019.07 (Feb 05 2024 - 16:25:49 +0800)

TLB ADDR:0x10e00000
Build Date: Feb 5 2024, 16:26:06
CPU: Hi3751v350
Boot Media: eMMC

gd:13ffff50,DRAM addr:0x0,size:0x40000000,actual size:0x40000000
1 GiB
DRAM actual size:1 GiB
WARNING: Caches not enabled
board_init,41

The DDR memory layout:
page table: 0x10e00000 - 0x11200000 4 MiB
stack: 0x11200000 - 0x11600000 4 MiB
.text: 0x14000000 - 0x1406cd20 435.3 KiB
data: 0x1406cd20 - 0x140dbf74 444.6 KiB
init_sequence_r done!
Loading Environment from MAILBOX... OK
set LOG level 0
vdp tcon pos info is not exist
HPLL clk=452649600, int_part=0x204b, minor_part=0x12710cb2
HPLL set new mode
not support panel vfb = 10, min vfb 12

SDK_VERSION: [HiDPTSmartSDKV200R001SPC070]
CUSTOM func[hi_drv_custom_board_init] line[292] :--board name is:HI3751V350_DEMO_BOARD, power on optimize: TRUE
power_on 1 g_poweron_status 0 !
NOTICE: BL31: v2.0(release):f021986f001
NOTICE: BL31: Built : 18:32:37, Jul 11 2023
Uncompressing Linux...Try to enter wfi
done, booting the kernel.
console:/ $

[elkhayati]

جرب الكوموند
forcerecovery

[mohamed khabiri]

جرب الكوموند
forcerecovery

recovery P50-352TV3.4 HISI352S.bin mohamed khabiri ok

EMMC was read and the recovery file was retrieved