دامب مجرب TCL MS901K

[borki]

L55E5690A-3D.MS901K.25Q16.bin.zip

L55E5690A-3D_MS901K-MEMC-6m40 V2.1.rar

[elkhayati]

L55E5690A-3D.MS901K.25Q16.bin.zip
L55E5690A-3D_MS901K-MEMC-6m40 V2.1.rar

waht is this: L55E5690A-3D_MS901K-MEMC-6m40 V2.1
which IC

[borki]

THIS MAINBOARD (M901K) HAS 2 CPU
1-MS901 WHICH IS THE MAIN CPU HAS A FLASH WITH THE MBOOT INSIDE IN 25Q16
2-6M40 WHICH IS SPECIFIC FOR SIGNAL ADAPTING (4K & 2K),(3D & 2D),PICTURE MOTION (MEMC) HAS A FLASH WITH BUILT IN ITS OWN SOFTWARE IN 25Q32

[elkhayati]

THIS MAINBOARD (M901K) HAS 2 CPU
1-MS901 WHICH IS THE MAIN CPU HAS A FLASH WITH THE MBOOT INSIDE IN 25Q16
2-6M40 WHICH IS SPECIFIC FOR SIGNAL ADAPTING (4K & 2K),(3D & 2D),PICTURE MOTION (MEMC) HAS A FLASH WITH BUILT IN ITS OWN SOFTWARE IN 25Q32

thank you
i have the board and I test the 2 filles
all is ok
but my motherboard don't accept a firmware
if you have emmc dump pease share it

[borki]

i will searh for you the dump and i have a software for such a case

[borki]

i am uploading a software for you .
please can you read your spi flash 25Q16 and upload it to know exactly which boot version is used to tell you what exactly you should do

[borki]

V8-MS90105 (6M40 off).rar

2014-1-V8-MS90105-LB1V072_20140123015715851.rar

[borki]

my friend first try to update the software by putting 2 copies of the software after extracting into usb 1 keep it as ms90105 and the 2nd rename it to ms90102 if it didn t work so write your spi flash with this mboot

[borki]

we are trying to bypass your boot commands that s why you have to put 2 copies ,unless this mboot after flashing into 25Q16 so no need for the 2nd copy but it could change remote control or serial number or else

[elkhayati]

i try V8-MS90104.bin & V8-MS90104.bin without result
maybe the emmc is dead

tv is comming from other technician & i dont know if dump is original