طلب مساعدة Firmware sunny sn39dil13/0216

[khalid XD]

maybe it's not too much if you do this. First, remove the downloaded file from the zip and put it on a USB drive, no larger than 2-4GB. Now insert the USB into the USB port of the TV. Now connect the power cable to the network. On the TV screen, a bar should appear that fills with lines very quickly. After this happens, unplug the TV cable from the power outlet. Wait a few seconds and insert the TV cable into the power outlet again.
Start the TV with its remote or with the power button on the TV itself and the picture should be normal.

[khalid XD]

maybe it's not too much if you do this. First, remove the downloaded file from the zip and put it on a USB drive, no larger than 2-4GB. Now insert the USB into the USB port of the TV. Now connect the power cable to the network. On the TV screen, a bar should appear that fills with lines very quickly. After this happens, unplug the TV cable from the power outlet. Wait a few seconds and insert the TV cable into the power outlet again.
Start the TV with its remote or with the power button on the TV itself and the picture should be normal.

OK MERCI
khalid.rala.2015@gmail.com

[fadili]

sent to your email

[khalid XD]

sent to your email

Thank you so much, brother, it's solved.