الفارابي للإلكترونيات

Hello, dear colleagues. I need your help. I have a TV with the above panel which gives a picture that flickert and freezes in cycles. There are some repair versions on YouTube, but they have not been successful for me. I ask colleagues who have experience in repairing panels to help me to bring it back to life.

Peace be upon you.
First, you must determine which side is affected, the right or the left, and cover the signal paths
Then, you must cut "VGH_EVEN and VGH_ODD"and connect them to VGH and VGL
If it doesn't work for you, reverse the connection to VGL and VGH
Only the healthy side should be connected

thank you for your effort. I have tried this method but it does not solve the problem in my case. Here are some photos of what the photo looks like after the intervention in the t-con. I have also tried with the jzy-01 module where I can change both vgh and vgl but without any satisfactory results.

Initially the photo looks like the first or third example and after about 10 minutes of work it adjusts a little better (see the photo in the middle) but at the beginning of the panel about 2 cm the photo remains with errors.

Sometimes the CKV signal paths on the damaged side must be cut and connected together