صفحة 6 من 8
Re: مهم vestel profile
مرسل: الاثنين 16 مايو 2022 4:05 pm
بواسطة fadili
FUEGO 32 INCH
MAIN 17MB211S
panel> ves315wndl-2d-n22
panel profiles with usb version sw v.1.24.2.0(t)
100% ok
Re: مهم vestel profile
مرسل: الأحد 22 مايو 2022 11:21 am
بواسطة elkhayati
hitachi 32fk5he4000
17mb211s
pnl fhd _st3151b01 _ves315undx
wifi + bleuteuth+ sat
original remote RCA3_43XX
Re: 17mb100/VESQNSSU01_2D_UHD
مرسل: الاثنين 6 يونيو 2022 1:11 pm
بواسطة elkhayati
profile
celcus CEL-48UHDSB-16_1
17mb100/VESQNSSU01_2D_UHD
Re: مهم vestel profile
مرسل: الثلاثاء 7 يونيو 2022 4:28 pm
بواسطة Mr3amo
profile 17MB95S-1_VES315WNDL-01
profile 17MB95S-1_VES315WNDL-01.rar
Re: مهم vestel profile
مرسل: السبت 11 يونيو 2022 4:53 pm
بواسطة Mr3amo
PROFILE SIERA QHD32-S4_17MB65-1 v2 _LTA320AP06
PROFILE SIERA QHD32-S4_17MB65-1 v2 _LTA320AP06.rar
Re: مهم TOSHIBA profile
مرسل: الاثنين 20 يونيو 2022 11:47 am
بواسطة borki
TOSHIBA_50UL4B63DG_17MB230.rar
Re: مFUEGO 39FG3305 profile
مرسل: الثلاثاء 5 يوليو 2022 11:36 am
بواسطة fadili
FUEGO 39FG3305
main 17mb211
panel> ves390wnda-2d-n11
usb profile
version firmware v05922 schreder.
Re: 17mb97+v390hj1-le1 pq data
مرسل: الثلاثاء 9 أغسطس 2022 1:55 pm
بواسطة fadili
17mb97+v390hj1-le1
panel( PQ ) data
Re: مهم vestel profile
مرسل: الخميس 11 أغسطس 2022 1:15 pm
بواسطة SAID
السلام عليكم
Profile مسحوب بعد إصلاح عطل بالبانل
EAS ELECTRIC E48SL800
Main Board 17MB211
Panel VES48OUNDS-2D
copying the profiles of the mainboard 17MBXX with the blind method.
مرسل: الاثنين 17 أكتوبر 2022 12:02 pm
بواسطة fadili
blind method to copy the PQ files, profile .spi in case for some reason the TV is left only in raster (without graphics)
1> first create a folder like downloadpq.mbxx on the usb stick.
2. insert the USB stick into the USB port of the TV
3> wait over 10sec.
4. press menu (wait 10sec)
5 press on remote control 4725 (wait 10sec).
6 press the chanel down key 1 time and wait about 5 seconds
7. using the key on the remote control, press the channel down key .........
8. so continue the process with this key until you finish (8 times)
8. confirm with the OK key. you will receive the data on the usb stick. first, perform this procedure when you have any TV in working condition.